3g mobile broadband wireless-n router mbrn3000 manual
For a list of Then open a For a list of compatible modems, see the NETGEAR website at All rights reserved. NETGEAR, the NETGEAR logo, and Connect with Innovation are you use a PIN to connect to the Internet, make sure it is entered correctly. For a list of For a list of compatible modems, see the NETGEAR website at Package Contents Step 3: Connect your computer. All rights reserved. NETGEAR and the NETGEAR logo are registered trademarks of NETGEAR, Inc. Other brand and product names are trademarks or March 2010 registered trademarks of their respective holders. Wireless-N Router. MBRN3000 User Manual. NETGEAR, Inc.San Jose, CA 95134 USAAll rights reserved. Trademarks. NETGEAR and the NETGEAR logo are trademarks of Netgear, Inc. Microsoft, Windows, and Windows NT areOther brand and product names are registered trademarks or trademarksStatement of ConditionsNETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuitFCC Statement. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 ofHowever, there is noIf this equipment does cause harmful interference toReorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance couldThe radio module has been evaluated under FCC Bulletin OET 65C (01-01) and found to be compliant to theSelection of other channels is not possible. Federal Communications Commission (FCC) Radiation Exposure Statement. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoidHereby, NETGEAR, Inc.Eesky. NETGEAR, Inc.http://innermiracles.com/6gXfrwIgPBASO103.xml
Tags:
3g mobile broadband wireless-n router mbrn3000 manual, 3g mobile broadband wireless-n router mbrn3000 manual download, 3g mobile broadband wireless-n router mbrn3000 manual pdf, 3g mobile broadband wireless-n router mbrn3000 manual free, 3g mobile broadband wireless-n router mbrn3000 manual online.
timto prohlasuje, ze tento Mobile Broadband Wireless-N Router. MBRN3000 je ve shodi se zakladnimi pozadavky a dalsimi poislusnymi ustanovenimi. Dansk. Undertegnede NETGEAR, Inc.Wireless-N Router MBRN3000 overholder de v?sentlige krav og ovrige relevante krav i. Deutsch. Hiermit erklart NETGEAR, Inc., dass sich das Gerat Mobile Broadband Wireless-N. Router MBRN3000 in Ubereinstimmung mit den grundlegenden Anforderungen und den. Eesti. Kaesolevaga kinnitab NETGEAR, Inc.English. Hereby, NETGEAR, Inc., declares that this Mobile Broadband Wireless-N Router. MBRN3000 is in compliance with the essential requirements and other relevant. Espanol. Por medio de la presente NETGEAR, Inc.Router MBRN3000 cumple con los requisitos esenciales y cualesquiera otrasFrancais. Par la presente NETGEAR, Inc.Router MBRN3000 est conforme aux exigences essentielles et aux autres dispositions. Italiano. Con la presente NETGEAR, Inc.Router MBRN3000 e conforme ai requisiti essenziali ed alle altre disposizioni pertinenti. Latviski. Ar so NETGEAR, Inc. deklarc, ka Mobile Broadband Wireless-N Router MBRN3000Lietuvio. Siuo NETGEAR, Inc. deklaruoja, kad sis Mobile Broadband Wireless-N RouterHierbij verklaart NETGEAR, Inc.MBRN3000 in overeenstemming is met de essentiele eisen en de andere relevante. Malti. Hawnhekk, NETGEAR, Inc., jiddikjara li dan Mobile Broadband Wireless-N Router. MBRN3000 jikkonforma mal-tiijiet essenzjali u ma provvedimenti orajn relevanti li hemm. Magyar. Alulirott, NETGEAR, Inc.Polski. Niniejszym NETGEAR, Inc.MBRN3000 jest zgodny z zasadniczymi wymogami oraz pozosta?ymi stosownymi. Portugues. NETGEAR, Inc. declara que este Mobile Broadband Wireless-N Router MBRN3000. Slovensko. NETGEAR, Inc. izjavlja, da je ta Mobile Broadband Wireless-N Router MBRN3000 v. Slovensky. NETGEAR, Inc. tymto vyhlasuje, ze Mobile Broadband Wireless-N Router MBRN3000. Suomi. NETGEAR, Inc. vakuuttaa taten etta Mobile Broadband Wireless-N Router MBRN3000. Svenska. Harmed intygar NETGEAR, Inc.http://www.pirotechnica.ru/userfiles/3gs-service-manual.xml
MBRN3000 star I overensstammelse med de vasentliga egenskapskrav och ovrigaA printed copy of the EU Declaration of Conformity certificate for this product is provided in the. MBRN3000 product package. Es wird hiermit bestatigt, da.Das vorschriftsma?ige Betreiben einiger GerateLesen Sie dazu bitte die Anmerkungen in der. Betriebsanleitung. Das Bundesamt fur Zulassungen in der Telekommunikation wurde davon unterrichtet, da.It is hereby certified that the Mobile Broadband Wireless-N Router MBRN3000 has been suppressed in accordance with. The operation of some equipment (forFederal Office for Telecommunications Approvals has been notified of the placing of this equipment on the marketVoluntary Control Council for Interference (VCCI) Statement. This equipment is in the second category (information equipment to be used in a residential area or an adjacent areaEquipment and Electronic Office Machines aimed at preventing radio interference in such residential areas. When used near a radio or TV receiver, it may become the cause of radio interference. Read instructions for correct handling. Customer Support. Refer to the Support Information Card that shipped with your Mobile Broadband Wireless-N Router MBRN3000. World Wide Web. NETGEAR maintains a World Wide Web home page that you can access at the universal resource locator (URL)Mozilla Firefox are required. Product and Publication Details. Model Number:October 2009. Product Family. Router. Product Name. Mobile Broadband Wireless-N Router MBRN3000. Home or Business Product. Home. Language. English. Publication Part Number:Mobile Broadband Wireless-N Router MBRN3000 User Manual. About This Manual. Conventions, Formats, and Scope. i. How to Print This Manual. ii. Revision History. ii. Chapter 1. Configuring Your Router to the Internet. Hardware Features.1-1. Router Front Panel.1-1. Router Back Panel.1-3. Router Label.1-4. Using the Router Stand.1-4. Logging In to Your Router.1-5. Accessing the Setup Wizard after Installation.http://www.drupalitalia.org/node/66069
1-6. Manually Configuring Your Internet Settings.1-7. Chapter 2. Wireless Network Configuration. Planning Your Wireless Network.2-1. Wireless Placement and Range Guidelines.2-2. Wireless Security Options.2-3. Manually Configuring Your Wireless Settings.2-4. Configuring WEP.2-6. Using Push 'N' Connect (WPS) to Configure Your Wireless Network.2-9. Using a WPS Button to Add a WPS Client.2-9. Using PIN Entry to Add a WPS Client.2-11. Connecting Additional Wireless Client Devices After WPS Setup.2-12. Adding More WPS Clients.2-12Chapter 3. Protecting Your Network. Protecting Access to Your Wireless Router.3-1. Changing the Built-In Password.3-1. Changing the Administrator Login Time-out.3-2. Configuring Basic Firewall Services.3-2. Blocking Keywords, Sites, and Services.3-3. Firewall Rules.3-5. Inbound Rules (Port Forwarding).3-6. Outbound Rules (Service Blocking).3-8. Order of Precedence for Rules.3-10. Services.3-10. Defining Services.3-11. Setting Times and Scheduling Firewall Services.3-11. Setting Your Time Zone.3-12. Scheduling Firewall Services.3-13. Chapter 4. Managing Your Network. Backing Up, Restoring, or Erasing Your Settings.4-1. Backing Up the Configuration to a File.4-1. Restoring the Configuration from a File.4-2. Erasing the Configuration.4-2. Upgrading the Router Firmware.4-2. Network Management Information.4-4. Router Status.4-4. Showing Statistics.4-6. Connection Status.4-7. Viewing Attached Devices.4-8. Viewing, Selecting, and Saving Logged Information.4-9. Examples of Log Messages.4-11. Enabling Security Event E-mail Notification.4-12. Running Diagnostic Utilities and Rebooting the Router.4-13. Enabling Remote Management.4-14. Configuring Remote Management.4-14Advanced Configuration. Advanced Wireless Settings.5-2. Wireless Station Access Control.5-3. Restricting Access by MAC Address.5-4. WAN Setup.5-5. Setting Up a Default DMZ Server.5-6. LAN IP Settings.5-7. DHCP Settings.5-10. Reserved IP Addresses.5-11. Dynamic DNS.5-11. Configuring Dynamic DNS.CFDCNV.COM/images/3-way-dometic-refrigerator-manual.pdf
5-12. Using Static Routes.5-13. Static Route Example.5-13. Configuring Static Routes.5-14. Universal Plug and Play (UPnP).5-15. Wireless Bridging and Repeating.5-16. Point-to-Point Bridge Configuration.5-17. Multi-Point Bridge Configuration.5-19. Repeater with Wireless Client Association.5-20. Chapter 6. Troubleshooting. Basic Functioning.6-1. Troubleshooting Access to the Router Main Menu.6-2. Troubleshooting the ISP Connection.6-4. Obtaining a WAN IP Address.6-4. Troubleshooting PPPoE or PPPoA.6-5. Troubleshooting Internet Browsing.6-5. Testing the LAN Path to Your Router.6-6. Testing the Path from Your Computer to a Remote Device.6-7. Restoring the Default Configuration and Password.6-7. Problems with Date and Time.6-8Technical Specifications and Factory Default Settings. Factory Default Settings. A-2. Appendix B. Related DocumentsConventions, Formats, and Scope. The conventions, formats, and scope of this manual are described in the following paragraphs. Typographical Conventions. This manual uses the following typographical conventions. Italic. Emphasis, books, CDs, file and server names, extensions. Bold. User input, IP addresses, GUI screen text. URL links. Formats. This manual uses the following formats to highlight special messages. Note: This format is used to highlight information of importance or special interest. Tip: This format is used to highlight a procedure that will save time or resources. Warning: Ignoring this type of note might result in a malfunction or damage to theScope. This manual is written for the Wireless Router according to these specifications. Product Version. Manual Publication Date. October 2009For more information about network, Internet, firewall, and VPN technologies, see the links to the. NETGEAR website in Appendix B, “Related Documents”.”. Note: Product updates are available on the NETGEAR, Inc.
website atTo print this manual, your computer must have the free Adobe Acrobat reader installed in order toThe Acrobat reader is available on the Adobe website atRevision History. Part Number. Version. Date. Number. DescriptionOctoberConfiguring Your Router to the Internet. This chapter describes how to configure your Mobile Broadband Wireless-N Router MBRN3000. Internet connection. For help with installation, see the Mobile Broadband Wireless-N Router. MBRN3000 Installation Guide. Hardware Features. The following sections describe the front panel, rear panel, and label. Router Front Panel. The router front panel shown below contains status LEDs. Power. LAN Ports (1-4)WirelessYou can use the LEDs to verify status and connections. The following table lists and describesTable 1. LED and Front Panel Button DescriptionsDescription. Solid green. Solid green. Power is supplied to the router. Solid Red. POST (Power-On Self-Test) failure or device malfunction. Off. Power is not supplied to the router. Factory Reset. Lights momentarily when the Restore Factory Settings button isSolid green. The Local port has detected an Ethernet link with a device. Blinking green. Data is being transmitted or received. No link is detected on this port. LAN PortsUSB device is ready to use. USB device is in use. Internet Port Solid green. WirelessThere is an Internet session. If the session is dropped due to an idleSolid red. IP connection failed (no DHCP or PPPoE response, PPPoEBlinking green. Data is being transmitted over the ADSL port. No Internet connection detected or device in bridged mode. Indicates that the Wireless port is initialized. Data is being transmitted or received over the wireless link. The Wireless Access Point is turned off. WPS wireless security is being enabled. The device is in the 2-minute interval to synchronize security. WPS is not being set or enabled. DescriptionTable 1.LED Activity. Description. Turn the wireless radio in the router on and off.
The wireless radio is on by default. The LEDWireless. Push 'N'. ConnectFor more information, about using the WPS method to implement security,Router Back Panel. The back panel of the router contains port connections. Figure 2. Viewed from left to right, the rear panel contains the following elements:Configuring Your Router to the InternetRouter Label. The label on the bottom of the router shows the router’s MAC address, serial number, security. PIN, and factory default login information. Factory Default Reset. Press for 6 seconds to reset the routerFigure 3. Using the Router Stand. For optimal wireless network performance, use the stand (included in the package) to positionFigure 4Logging In to Your Router. When you first connect to your router during installation, a Setup Wizard appears. For help usingWireless-N Router MBRN3000 Installation Guide. After the initial configuration, you can use your Web browser to log into the router to router toLinks to Knowledge Base and documentation are also available on theNote: Your computer must be configured for DHCP. For help with configuring DHCP, seeWhen you have logged in, if you do not click Logout, the router waits for 5 minutes after noTo log in to the router:Figure 1-1. Configuring Your Router to the InternetNote: The router user name and password are not the same as any other user name orAfter the router hasChecking for Firmware Updates screen. After initial configuration, this screen displaysFigure 1-2. Router Status screen. The Router Status screen displays if the router has not beenSee “Viewing Modem. Router Status Information” on page 4-4.Select Setup Wizard from the router menu to set up your Internet connection and wirelessSee “Accessing the Setup Wizard after Installation” on page 1-6. You can manually configure the router settings. See “Manually Configuring Your Internet. Settings” on page 1-7.
Accessing the Setup Wizard after InstallationFigure 1-3The Setup Wizard prompts you to configure your Internet connection and wireless network asManually Configuring Your Internet Settings. In order to connect to the network, and active broadband service account is required. PleaseTo manually configure your Internet settings:Configuring Your Router to the InternetFigure 1-4. Table 1-1. Broadband Settings fields. Fields and Checkboxes. Username. Internet account login username. Password. Internet account password for authentication. Pin code. Pin code of the SIM card, where applicable. ISP network name. PDP type. Type of packet data protocol. Connect automatically at startup. If this checkbox is selected, the modem automatically connects to theThis should be selected after loginReconnect automatically whenIf this check box is selected, the modem will attempt to reconnect to theUnder normal situation, thisConnect only to preferredIf this checkbox is cleared (not selected) the unit may roam to anyConnection status. Current WAN port status. The following buttons are available:Click Disconnect when you want to manually disconnect from current network. Click Apply when you finish changing the settings. Click Cancel to discard changes. Click Refresh to update connection status. Configuring Your Router to the InternetWireless Network Configuration. For a wireless connection, the SSID, also called the wireless network name, and the wirelessNETGEAR strongly recommends that you use wireless security. Warning: Computers can connect wirelessly at a range of several hundred feet. This canThis chapter includes:Planning Your Wireless Network. For compliance and compatibility between similar products in your area, the operating channelTo manually configure the wireless settings, you must know the following. SSID. The default SSID for the router is NETGEAR-3G. The wireless mode (80.211n, 802.11g, or 802.11b) that each wireless adapter supports. Wireless security option.
To successfully implement wireless security, check each wirelessSee “Manually Configuring Your Wireless Settings” on page 2-4. Push 'N' Connect (WPS) automatically implements wireless security on the router while, at theYou activate WPS byTo set up your wireless network using the WPS feature:Make sure that all wireless computers and wireless adapters on the network are Wi-FiSee “Using Push 'N' Connect (WPS) to Configure Your Wireless Network” on page 2-9. Wireless Placement and Range Guidelines. The range of your wireless connection can vary significantly based on the physical placement ofFor best results, place your router according to the following guidelines. Near the center of the area in which your PCs will operate. In an elevated location such as a high shelf where the wirelessly connected PCs have line-ofsight access (even if through walls). Away from sources of interference, such as PCs, microwave ovens, and 2.4 GHz cordlessAway from large metal surfaces. Put the antenna in a vertical position to provide the best side-to-side coverage. Put the antennaIf using multiple access points, it is better if adjacent access points use different radioThe recommended channel spacing betweenThe time it takes to establish a wireless connection can vary depending on both your securityWEP connections can take slightly longer to establish. Also, WEPWireless Network ConfigurationWireless Security Options. Indoors, computers can connect over 802.11g wireless networks at a maximum range of up to 300Unlike wired network data, your wireless data transmissions can extend beyond your walls andFor this reason, use the security features ofThe Wireless Router provides highly effective security features whichDeploy the security features appropriate to your needs. There are several ways you can enhance the security of your wireless network. Figure 2-1. Restrict Access Based on MAC Address.
You can allow only trusted PCs to connect so thatRestricting access by MAC addressTurn Off the Broadcast of the Wireless Network Name SSID. If you disable broadcast ofThis nullifies wireless network. WEP. Wired Equivalent Privacy (WEP) data encryption provides data security. WEP Shared. Key authentication and WEP data encryption block all but the most determined eavesdropper. This data encryption mode has been superseded by WPA-PSK and WPA2-PSK.
Series Z-Vent MBV --Vented Ball Valve for Sodium Hypochlorite -- Vented ball valve for sodium hypochloriteand other applications prone to outgassing. Series LS --Limit Stops -- For use with actuated ball valves. Series SW --Limit Switches -- For use with actuated ball valves. Air-Operated Diaphragm Valves and Globe Valves -Perhaps your application requires more rapid shut-off, or you want to use line pressure to open the valve, or have other reasons you don't specifically want a ball valve. If so, True Blue ASO, BSD, or BSR is likely to meet your needs. Online Pressure DropCalculator -- Allows you to easily determine the probable pressuredrop across a valve.All Rights Reserved. Ideal where lead free and NSF approved construction are required for potable drinking water as well as other industrial applications. These full port 3-way valves are typically used as a diverter or selector valves. Air pressure applied to the spring return or double acting actuator rotates the output drive, turning the ball 90 degrees which changes the L-port or T-port flow configuration. One quarter turn of the ball changes the valve position. Multiport valves can be used for mixing, selector or diverter valve applications. These 3-way lead free valves can be operated with the latch locking lever or ISO 5211 direct mount to an electric or air actuator. Manual ball valves get their name from the metal ball inside the device, which has a hole through the middle. You can discover more in our ball valves guide. How do manual ball valves work. When the valve is open, the hole is aligned with the pipes and permits flow. When it is closed, the hole is rotated perpendicular to the flow, shutting the valve off completely. The valve's handle lies flat in alignment with the flow when open, and is perpendicular to it when closed, making for easy visual confirmation of the valve's status.
The handle can also be set in half-turn or quarter-turn positions if required, reducing the fluid's flow level and pressure. Types of manual ball valves When choosing manual ball valves, pay attention to the connection type, in which they can be attached to the shut-off valve. These methods include compression, push-fitting, threaded ends and solvent cement sockets. Also, pay attention to seals, handle material and handle configuration options e.g it the handle can be mounted in both directions or if it's a fixed option. In some models, a ball can be operated with a screwdriver. This allows installation in confined spaces. Manual ball valves are also differentiated by the materials they are made from, which include brass, iron, PVC and stainless steel. The application of a manual ball valve is determined by this; for instance, a stainless steel valve is much more capable of withstanding heat than one made from PVC. Otherwise, we’ll assume you’re OK with our use of cookies. Please change your selection.Please change your selection. Clear all selections These ball valves are durable and perform well even after long periods of time.Ball values can be used for air, gases, water, steam, chemicals,.Manual ball valves are used to operate shut off valves which control water flow and pressure.Ball valves can be used for air, gases, water, steam, chemicals, petrochemical products, etc. These valves are simple to use, you move. You can get the added benefit of higher close off pressure. Griswold Controls’ Patent Pending 3 Way Ball: Many manufacturers settle for providing non-equal percentage control to the coil, or they achieve equal percentage control by using a costly, custom programmed actuator.Installation is a snap with easy, one-handed removal or engagement of the actuator to the valve body. Push the button and lift. It’s that simple. The VG1600 is supplied with control flow disks providing the right flow rate for a wide range of applications.
The use of a multiport ball valve simplifies piping and eliminates the need for an additional valve and tee fitting. A “L” ported ball valve permits flow from the bottom entry to either the left or right ports or to an OFF position. An optional tee ported ball allows simultaneous left and right flow versatile ball valves with two “branches” and one “leg”. Fluid flow direction is governed by an interchangeable ball in the center of the valve. True union ball valves can be lifted from the line, without having to move the piping, simply by loosening the two union nuts.Commonly used industries include chemical processing, bleach plants, aquariums, mining, water treatment, swimming pools, water features, fountains, landfills and power plants. Phone: 1-800-343-3618. Although these valves provide excellent sealing capability, they produce greater fluid resistance compared to gate valves. Please inquire for other specifications. We design each valve according to the flow parameters presented. Contact our sales representative for details. Both a metal seat type and a soft seat type are available. Please consider the technical attributes. Please accept cookie privacy policy first. The reliable self-adjusting packing gland provides high sealing integrity. These maintenance-free and robust valves can be retro-fitted with a comprehensive range of accessories for position indication, stroke limitation or manual override. Cost effective Multi-port Series ball valves feature multi-directional control combined with shutoff capacity in one valve. Valve duplication and the need for an extra shutoff valve are eliminated. Utilizing Belleville washers, the stem seal automatically adjusts to compensate for changes in temperature and normal wear. The primary seal is a thrust washer and O-ring assembly. The adjustable stem packing creates a secondary seal between the stem and body in the upper stem journal area.
FOUR SEAT DESIGN: As standard, Multiport Series valves are supplied with an additional fourth seat. This seat acts as a self-contained seal to prevent leakage in the cavity area and maintains proper alignment of the ball. Flow-Tek’s seat design ensures bi-directional, bubble-tight sealing with low operating torque. SEAT SELECTION: A wide range of seat materials are available to meet most applications. The standard seat is TFM. INTERCHANGEABILITY: Many parts including balls, stems, seats, and stem and body seals are interchangeable between different models of the same size valve. Cavity fillers reduce the possibility of media contamination due to line media fluids becoming entrapped in the void between the ball and the valve body wall. SECURE MOUNT: The integral cast top flange ensures positive actuator mounting. Actuation equipment can be easily and safely removed while the valve is under full line pressure. The mounting flange is designed to ISO 5211 standards with direct flush-mount capabilities. By repositioning the travel stop pin bolt on the mounting flange, all flow patterns are available from the standard valve. All stems offer blowout proof protection. Balls are precision machined and mirror finished for bubble-tight shutoff with less operating torque. Flow-Tek balls have machined edges to reduce seat wear providing a high life cycle. Standard Applications Mixing or blending of line medias Diversion of flow to different locations Bypass of flow around strainers, meters, heat exchangers, etc. Direct flow out of or into storage tanks Shutoff flow from different locations.
Next, disconnect high voltage cable from electrode. Then reconnect DC power to the terminal block. If sparking starts, cable is good, DO NOT REPLACE, check the electrode. If no sparking, disconnect DC power at the terminal block and then disconnect high voltage cable at the igniter. Reconnect DC power to the terminal block. If sparking sound from igniter, replace the high HIGH VOLTAGE voltage cable. Next, disconnect DC power at the terminal block. Remove high voltage cable from igniter. Reconnect DC power, the igniter should produce a sparking sound. If not, replace the igniter. ON MODEL RM2510, 2604, 2610 AND 2804, 2810: Next, with the igniter producing spark, set the meter on 20 volts DC or lower scale, connect meter leads to L and ground terminals on the igniter. The meter should read a pulsating voltage. If all of the previous checks are correct, the igniter is good, DO NOT REPLACE. The pulsating voltage allows a lamp to illuminate on the front of the refrigerator to advise the customer spark has been produced. To check the lamp, first, verify it is wired correctly. Next, verify the lamp receptacle is receiving the signal, if so, and lamp is not illuminating (flashing), replace the lamp. NOTE: Do not supply DC power to the lamp. It will NOT illuminate with normal DC power. For the lamp to illuminate it must receive an increased DC signal. DC COMPONENTS SWITCH This is the switch that selects the mode of operation (120 volt AC, gas and 12 volt DC). It is also a circuit interrupter for each mode of operation on the refrigerator. When the customer selects either AC, gas or DC (3- way models only) operation, the selector switch directs electricity first to the interior light and the thermostat and on to the heating element or the igniter for gas mode. When this switch is turned off, the AC or DC circuit is interrupted. To check the switch in the AC mode, continuity should exist between these terminals: 1 to 1A, 2 to 2A and 7 to 7A.
Group visibility:
Public (World-wide open, for example for demo courses)
Status: AVAILABLE
Last checked: 9 Minutes ago!
In order to read or download 3g mobile broadband wireless-n router mbrn3000 manual ebook, you need to create a FREE account.
Download Now!
eBook includes PDF, ePub and Kindle version
3g mobile broadband wireless-n router mbrn3000 manual
For a list of Then open a For a list of compatible modems, see the NETGEAR website at All rights reserved. NETGEAR, the NETGEAR logo, and Connect with Innovation are you use a PIN to connect to the Internet, make sure it is entered correctly. For a list of For a list of compatible modems, see the NETGEAR website at Package Contents Step 3: Connect your computer. All rights reserved. NETGEAR and the NETGEAR logo are registered trademarks of NETGEAR, Inc. Other brand and product names are trademarks or March 2010 registered trademarks of their respective holders. Wireless-N Router. MBRN3000 User Manual. NETGEAR, Inc.San Jose, CA 95134 USAAll rights reserved. Trademarks. NETGEAR and the NETGEAR logo are trademarks of Netgear, Inc. Microsoft, Windows, and Windows NT areOther brand and product names are registered trademarks or trademarksStatement of ConditionsNETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuitFCC Statement. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 ofHowever, there is noIf this equipment does cause harmful interference toReorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance couldThe radio module has been evaluated under FCC Bulletin OET 65C (01-01) and found to be compliant to theSelection of other channels is not possible. Federal Communications Commission (FCC) Radiation Exposure Statement. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoidHereby, NETGEAR, Inc.Eesky. NETGEAR, Inc.http://innermiracles.com/6gXfrwIgPBASO103.xml
Tags:- 3g mobile broadband wireless-n router mbrn3000 manual, 3g mobile broadband wireless-n router mbrn3000 manual download, 3g mobile broadband wireless-n router mbrn3000 manual pdf, 3g mobile broadband wireless-n router mbrn3000 manual free, 3g mobile broadband wireless-n router mbrn3000 manual online.
timto prohlasuje, ze tento Mobile Broadband Wireless-N Router. MBRN3000 je ve shodi se zakladnimi pozadavky a dalsimi poislusnymi ustanovenimi. Dansk. Undertegnede NETGEAR, Inc.Wireless-N Router MBRN3000 overholder de v?sentlige krav og ovrige relevante krav i. Deutsch. Hiermit erklart NETGEAR, Inc., dass sich das Gerat Mobile Broadband Wireless-N. Router MBRN3000 in Ubereinstimmung mit den grundlegenden Anforderungen und den. Eesti. Kaesolevaga kinnitab NETGEAR, Inc.English. Hereby, NETGEAR, Inc., declares that this Mobile Broadband Wireless-N Router. MBRN3000 is in compliance with the essential requirements and other relevant. Espanol. Por medio de la presente NETGEAR, Inc.Router MBRN3000 cumple con los requisitos esenciales y cualesquiera otrasFrancais. Par la presente NETGEAR, Inc.Router MBRN3000 est conforme aux exigences essentielles et aux autres dispositions. Italiano. Con la presente NETGEAR, Inc.Router MBRN3000 e conforme ai requisiti essenziali ed alle altre disposizioni pertinenti. Latviski. Ar so NETGEAR, Inc. deklarc, ka Mobile Broadband Wireless-N Router MBRN3000Lietuvio. Siuo NETGEAR, Inc. deklaruoja, kad sis Mobile Broadband Wireless-N RouterHierbij verklaart NETGEAR, Inc.MBRN3000 in overeenstemming is met de essentiele eisen en de andere relevante. Malti. Hawnhekk, NETGEAR, Inc., jiddikjara li dan Mobile Broadband Wireless-N Router. MBRN3000 jikkonforma mal-tiijiet essenzjali u ma provvedimenti orajn relevanti li hemm. Magyar. Alulirott, NETGEAR, Inc.Polski. Niniejszym NETGEAR, Inc.MBRN3000 jest zgodny z zasadniczymi wymogami oraz pozosta?ymi stosownymi. Portugues. NETGEAR, Inc. declara que este Mobile Broadband Wireless-N Router MBRN3000. Slovensko. NETGEAR, Inc. izjavlja, da je ta Mobile Broadband Wireless-N Router MBRN3000 v. Slovensky. NETGEAR, Inc. tymto vyhlasuje, ze Mobile Broadband Wireless-N Router MBRN3000. Suomi. NETGEAR, Inc. vakuuttaa taten etta Mobile Broadband Wireless-N Router MBRN3000. Svenska. Harmed intygar NETGEAR, Inc.http://www.pirotechnica.ru/userfiles/3gs-service-manual.xml
MBRN3000 star I overensstammelse med de vasentliga egenskapskrav och ovrigaA printed copy of the EU Declaration of Conformity certificate for this product is provided in the. MBRN3000 product package. Es wird hiermit bestatigt, da.Das vorschriftsma?ige Betreiben einiger GerateLesen Sie dazu bitte die Anmerkungen in der. Betriebsanleitung. Das Bundesamt fur Zulassungen in der Telekommunikation wurde davon unterrichtet, da.It is hereby certified that the Mobile Broadband Wireless-N Router MBRN3000 has been suppressed in accordance with. The operation of some equipment (forFederal Office for Telecommunications Approvals has been notified of the placing of this equipment on the marketVoluntary Control Council for Interference (VCCI) Statement. This equipment is in the second category (information equipment to be used in a residential area or an adjacent areaEquipment and Electronic Office Machines aimed at preventing radio interference in such residential areas. When used near a radio or TV receiver, it may become the cause of radio interference. Read instructions for correct handling. Customer Support. Refer to the Support Information Card that shipped with your Mobile Broadband Wireless-N Router MBRN3000. World Wide Web. NETGEAR maintains a World Wide Web home page that you can access at the universal resource locator (URL)Mozilla Firefox are required. Product and Publication Details. Model Number:October 2009. Product Family. Router. Product Name. Mobile Broadband Wireless-N Router MBRN3000. Home or Business Product. Home. Language. English. Publication Part Number:Mobile Broadband Wireless-N Router MBRN3000 User Manual. About This Manual. Conventions, Formats, and Scope. i. How to Print This Manual. ii. Revision History. ii. Chapter 1. Configuring Your Router to the Internet. Hardware Features.1-1. Router Front Panel.1-1. Router Back Panel.1-3. Router Label.1-4. Using the Router Stand.1-4. Logging In to Your Router.1-5. Accessing the Setup Wizard after Installation.http://www.drupalitalia.org/node/66069
1-6. Manually Configuring Your Internet Settings.1-7. Chapter 2. Wireless Network Configuration. Planning Your Wireless Network.2-1. Wireless Placement and Range Guidelines.2-2. Wireless Security Options.2-3. Manually Configuring Your Wireless Settings.2-4. Configuring WEP.2-6. Using Push 'N' Connect (WPS) to Configure Your Wireless Network.2-9. Using a WPS Button to Add a WPS Client.2-9. Using PIN Entry to Add a WPS Client.2-11. Connecting Additional Wireless Client Devices After WPS Setup.2-12. Adding More WPS Clients.2-12Chapter 3. Protecting Your Network. Protecting Access to Your Wireless Router.3-1. Changing the Built-In Password.3-1. Changing the Administrator Login Time-out.3-2. Configuring Basic Firewall Services.3-2. Blocking Keywords, Sites, and Services.3-3. Firewall Rules.3-5. Inbound Rules (Port Forwarding).3-6. Outbound Rules (Service Blocking).3-8. Order of Precedence for Rules.3-10. Services.3-10. Defining Services.3-11. Setting Times and Scheduling Firewall Services.3-11. Setting Your Time Zone.3-12. Scheduling Firewall Services.3-13. Chapter 4. Managing Your Network. Backing Up, Restoring, or Erasing Your Settings.4-1. Backing Up the Configuration to a File.4-1. Restoring the Configuration from a File.4-2. Erasing the Configuration.4-2. Upgrading the Router Firmware.4-2. Network Management Information.4-4. Router Status.4-4. Showing Statistics.4-6. Connection Status.4-7. Viewing Attached Devices.4-8. Viewing, Selecting, and Saving Logged Information.4-9. Examples of Log Messages.4-11. Enabling Security Event E-mail Notification.4-12. Running Diagnostic Utilities and Rebooting the Router.4-13. Enabling Remote Management.4-14. Configuring Remote Management.4-14Advanced Configuration. Advanced Wireless Settings.5-2. Wireless Station Access Control.5-3. Restricting Access by MAC Address.5-4. WAN Setup.5-5. Setting Up a Default DMZ Server.5-6. LAN IP Settings.5-7. DHCP Settings.5-10. Reserved IP Addresses.5-11. Dynamic DNS.5-11. Configuring Dynamic DNS.CFDCNV.COM/images/3-way-dometic-refrigerator-manual.pdf
5-12. Using Static Routes.5-13. Static Route Example.5-13. Configuring Static Routes.5-14. Universal Plug and Play (UPnP).5-15. Wireless Bridging and Repeating.5-16. Point-to-Point Bridge Configuration.5-17. Multi-Point Bridge Configuration.5-19. Repeater with Wireless Client Association.5-20. Chapter 6. Troubleshooting. Basic Functioning.6-1. Troubleshooting Access to the Router Main Menu.6-2. Troubleshooting the ISP Connection.6-4. Obtaining a WAN IP Address.6-4. Troubleshooting PPPoE or PPPoA.6-5. Troubleshooting Internet Browsing.6-5. Testing the LAN Path to Your Router.6-6. Testing the Path from Your Computer to a Remote Device.6-7. Restoring the Default Configuration and Password.6-7. Problems with Date and Time.6-8Technical Specifications and Factory Default Settings. Factory Default Settings. A-2. Appendix B. Related DocumentsConventions, Formats, and Scope. The conventions, formats, and scope of this manual are described in the following paragraphs. Typographical Conventions. This manual uses the following typographical conventions. Italic. Emphasis, books, CDs, file and server names, extensions. Bold. User input, IP addresses, GUI screen text. URL links. Formats. This manual uses the following formats to highlight special messages. Note: This format is used to highlight information of importance or special interest. Tip: This format is used to highlight a procedure that will save time or resources. Warning: Ignoring this type of note might result in a malfunction or damage to theScope. This manual is written for the Wireless Router according to these specifications. Product Version. Manual Publication Date. October 2009For more information about network, Internet, firewall, and VPN technologies, see the links to the. NETGEAR website in Appendix B, “Related Documents”.”. Note: Product updates are available on the NETGEAR, Inc.
website atTo print this manual, your computer must have the free Adobe Acrobat reader installed in order toThe Acrobat reader is available on the Adobe website atRevision History. Part Number. Version. Date. Number. DescriptionOctoberConfiguring Your Router to the Internet. This chapter describes how to configure your Mobile Broadband Wireless-N Router MBRN3000. Internet connection. For help with installation, see the Mobile Broadband Wireless-N Router. MBRN3000 Installation Guide. Hardware Features. The following sections describe the front panel, rear panel, and label. Router Front Panel. The router front panel shown below contains status LEDs. Power. LAN Ports (1-4)WirelessYou can use the LEDs to verify status and connections. The following table lists and describesTable 1. LED and Front Panel Button DescriptionsDescription. Solid green. Solid green. Power is supplied to the router. Solid Red. POST (Power-On Self-Test) failure or device malfunction. Off. Power is not supplied to the router. Factory Reset. Lights momentarily when the Restore Factory Settings button isSolid green. The Local port has detected an Ethernet link with a device. Blinking green. Data is being transmitted or received. No link is detected on this port. LAN PortsUSB device is ready to use. USB device is in use. Internet Port Solid green. WirelessThere is an Internet session. If the session is dropped due to an idleSolid red. IP connection failed (no DHCP or PPPoE response, PPPoEBlinking green. Data is being transmitted over the ADSL port. No Internet connection detected or device in bridged mode. Indicates that the Wireless port is initialized. Data is being transmitted or received over the wireless link. The Wireless Access Point is turned off. WPS wireless security is being enabled. The device is in the 2-minute interval to synchronize security. WPS is not being set or enabled. DescriptionTable 1.LED Activity. Description. Turn the wireless radio in the router on and off.
The wireless radio is on by default. The LEDWireless. Push 'N'. ConnectFor more information, about using the WPS method to implement security,Router Back Panel. The back panel of the router contains port connections. Figure 2. Viewed from left to right, the rear panel contains the following elements:Configuring Your Router to the InternetRouter Label. The label on the bottom of the router shows the router’s MAC address, serial number, security. PIN, and factory default login information. Factory Default Reset. Press for 6 seconds to reset the routerFigure 3. Using the Router Stand. For optimal wireless network performance, use the stand (included in the package) to positionFigure 4Logging In to Your Router. When you first connect to your router during installation, a Setup Wizard appears. For help usingWireless-N Router MBRN3000 Installation Guide. After the initial configuration, you can use your Web browser to log into the router to router toLinks to Knowledge Base and documentation are also available on theNote: Your computer must be configured for DHCP. For help with configuring DHCP, seeWhen you have logged in, if you do not click Logout, the router waits for 5 minutes after noTo log in to the router:Figure 1-1. Configuring Your Router to the InternetNote: The router user name and password are not the same as any other user name orAfter the router hasChecking for Firmware Updates screen. After initial configuration, this screen displaysFigure 1-2. Router Status screen. The Router Status screen displays if the router has not beenSee “Viewing Modem. Router Status Information” on page 4-4.Select Setup Wizard from the router menu to set up your Internet connection and wirelessSee “Accessing the Setup Wizard after Installation” on page 1-6. You can manually configure the router settings. See “Manually Configuring Your Internet. Settings” on page 1-7.
Accessing the Setup Wizard after InstallationFigure 1-3The Setup Wizard prompts you to configure your Internet connection and wireless network asManually Configuring Your Internet Settings. In order to connect to the network, and active broadband service account is required. PleaseTo manually configure your Internet settings:Configuring Your Router to the InternetFigure 1-4. Table 1-1. Broadband Settings fields. Fields and Checkboxes. Username. Internet account login username. Password. Internet account password for authentication. Pin code. Pin code of the SIM card, where applicable. ISP network name. PDP type. Type of packet data protocol. Connect automatically at startup. If this checkbox is selected, the modem automatically connects to theThis should be selected after loginReconnect automatically whenIf this check box is selected, the modem will attempt to reconnect to theUnder normal situation, thisConnect only to preferredIf this checkbox is cleared (not selected) the unit may roam to anyConnection status. Current WAN port status. The following buttons are available:Click Disconnect when you want to manually disconnect from current network. Click Apply when you finish changing the settings. Click Cancel to discard changes. Click Refresh to update connection status. Configuring Your Router to the InternetWireless Network Configuration. For a wireless connection, the SSID, also called the wireless network name, and the wirelessNETGEAR strongly recommends that you use wireless security. Warning: Computers can connect wirelessly at a range of several hundred feet. This canThis chapter includes:Planning Your Wireless Network. For compliance and compatibility between similar products in your area, the operating channelTo manually configure the wireless settings, you must know the following. SSID. The default SSID for the router is NETGEAR-3G. The wireless mode (80.211n, 802.11g, or 802.11b) that each wireless adapter supports. Wireless security option.
To successfully implement wireless security, check each wirelessSee “Manually Configuring Your Wireless Settings” on page 2-4. Push 'N' Connect (WPS) automatically implements wireless security on the router while, at theYou activate WPS byTo set up your wireless network using the WPS feature:Make sure that all wireless computers and wireless adapters on the network are Wi-FiSee “Using Push 'N' Connect (WPS) to Configure Your Wireless Network” on page 2-9. Wireless Placement and Range Guidelines. The range of your wireless connection can vary significantly based on the physical placement ofFor best results, place your router according to the following guidelines. Near the center of the area in which your PCs will operate. In an elevated location such as a high shelf where the wirelessly connected PCs have line-ofsight access (even if through walls). Away from sources of interference, such as PCs, microwave ovens, and 2.4 GHz cordlessAway from large metal surfaces. Put the antenna in a vertical position to provide the best side-to-side coverage. Put the antennaIf using multiple access points, it is better if adjacent access points use different radioThe recommended channel spacing betweenThe time it takes to establish a wireless connection can vary depending on both your securityWEP connections can take slightly longer to establish. Also, WEPWireless Network ConfigurationWireless Security Options. Indoors, computers can connect over 802.11g wireless networks at a maximum range of up to 300Unlike wired network data, your wireless data transmissions can extend beyond your walls andFor this reason, use the security features ofThe Wireless Router provides highly effective security features whichDeploy the security features appropriate to your needs. There are several ways you can enhance the security of your wireless network. Figure 2-1. Restrict Access Based on MAC Address.
You can allow only trusted PCs to connect so thatRestricting access by MAC addressTurn Off the Broadcast of the Wireless Network Name SSID. If you disable broadcast ofThis nullifies wireless network. WEP. Wired Equivalent Privacy (WEP) data encryption provides data security. WEP Shared. Key authentication and WEP data encryption block all but the most determined eavesdropper. This data encryption mode has been superseded by WPA-PSK and WPA2-PSK.
Series Z-Vent MBV --Vented Ball Valve for Sodium Hypochlorite -- Vented ball valve for sodium hypochloriteand other applications prone to outgassing. Series LS --Limit Stops -- For use with actuated ball valves. Series SW --Limit Switches -- For use with actuated ball valves. Air-Operated Diaphragm Valves and Globe Valves -Perhaps your application requires more rapid shut-off, or you want to use line pressure to open the valve, or have other reasons you don't specifically want a ball valve. If so, True Blue ASO, BSD, or BSR is likely to meet your needs. Online Pressure DropCalculator -- Allows you to easily determine the probable pressuredrop across a valve.All Rights Reserved. Ideal where lead free and NSF approved construction are required for potable drinking water as well as other industrial applications. These full port 3-way valves are typically used as a diverter or selector valves. Air pressure applied to the spring return or double acting actuator rotates the output drive, turning the ball 90 degrees which changes the L-port or T-port flow configuration. One quarter turn of the ball changes the valve position. Multiport valves can be used for mixing, selector or diverter valve applications. These 3-way lead free valves can be operated with the latch locking lever or ISO 5211 direct mount to an electric or air actuator. Manual ball valves get their name from the metal ball inside the device, which has a hole through the middle. You can discover more in our ball valves guide. How do manual ball valves work. When the valve is open, the hole is aligned with the pipes and permits flow. When it is closed, the hole is rotated perpendicular to the flow, shutting the valve off completely. The valve's handle lies flat in alignment with the flow when open, and is perpendicular to it when closed, making for easy visual confirmation of the valve's status.
The handle can also be set in half-turn or quarter-turn positions if required, reducing the fluid's flow level and pressure. Types of manual ball valves When choosing manual ball valves, pay attention to the connection type, in which they can be attached to the shut-off valve. These methods include compression, push-fitting, threaded ends and solvent cement sockets. Also, pay attention to seals, handle material and handle configuration options e.g it the handle can be mounted in both directions or if it's a fixed option. In some models, a ball can be operated with a screwdriver. This allows installation in confined spaces. Manual ball valves are also differentiated by the materials they are made from, which include brass, iron, PVC and stainless steel. The application of a manual ball valve is determined by this; for instance, a stainless steel valve is much more capable of withstanding heat than one made from PVC. Otherwise, we’ll assume you’re OK with our use of cookies. Please change your selection.Please change your selection. Clear all selections These ball valves are durable and perform well even after long periods of time.Ball values can be used for air, gases, water, steam, chemicals,.Manual ball valves are used to operate shut off valves which control water flow and pressure.Ball valves can be used for air, gases, water, steam, chemicals, petrochemical products, etc. These valves are simple to use, you move. You can get the added benefit of higher close off pressure. Griswold Controls’ Patent Pending 3 Way Ball: Many manufacturers settle for providing non-equal percentage control to the coil, or they achieve equal percentage control by using a costly, custom programmed actuator.Installation is a snap with easy, one-handed removal or engagement of the actuator to the valve body. Push the button and lift. It’s that simple. The VG1600 is supplied with control flow disks providing the right flow rate for a wide range of applications.
The use of a multiport ball valve simplifies piping and eliminates the need for an additional valve and tee fitting. A “L” ported ball valve permits flow from the bottom entry to either the left or right ports or to an OFF position. An optional tee ported ball allows simultaneous left and right flow versatile ball valves with two “branches” and one “leg”. Fluid flow direction is governed by an interchangeable ball in the center of the valve. True union ball valves can be lifted from the line, without having to move the piping, simply by loosening the two union nuts.Commonly used industries include chemical processing, bleach plants, aquariums, mining, water treatment, swimming pools, water features, fountains, landfills and power plants. Phone: 1-800-343-3618. Although these valves provide excellent sealing capability, they produce greater fluid resistance compared to gate valves. Please inquire for other specifications. We design each valve according to the flow parameters presented. Contact our sales representative for details. Both a metal seat type and a soft seat type are available. Please consider the technical attributes. Please accept cookie privacy policy first. The reliable self-adjusting packing gland provides high sealing integrity. These maintenance-free and robust valves can be retro-fitted with a comprehensive range of accessories for position indication, stroke limitation or manual override. Cost effective Multi-port Series ball valves feature multi-directional control combined with shutoff capacity in one valve. Valve duplication and the need for an extra shutoff valve are eliminated. Utilizing Belleville washers, the stem seal automatically adjusts to compensate for changes in temperature and normal wear. The primary seal is a thrust washer and O-ring assembly. The adjustable stem packing creates a secondary seal between the stem and body in the upper stem journal area.
FOUR SEAT DESIGN: As standard, Multiport Series valves are supplied with an additional fourth seat. This seat acts as a self-contained seal to prevent leakage in the cavity area and maintains proper alignment of the ball. Flow-Tek’s seat design ensures bi-directional, bubble-tight sealing with low operating torque. SEAT SELECTION: A wide range of seat materials are available to meet most applications. The standard seat is TFM. INTERCHANGEABILITY: Many parts including balls, stems, seats, and stem and body seals are interchangeable between different models of the same size valve. Cavity fillers reduce the possibility of media contamination due to line media fluids becoming entrapped in the void between the ball and the valve body wall. SECURE MOUNT: The integral cast top flange ensures positive actuator mounting. Actuation equipment can be easily and safely removed while the valve is under full line pressure. The mounting flange is designed to ISO 5211 standards with direct flush-mount capabilities. By repositioning the travel stop pin bolt on the mounting flange, all flow patterns are available from the standard valve. All stems offer blowout proof protection. Balls are precision machined and mirror finished for bubble-tight shutoff with less operating torque. Flow-Tek balls have machined edges to reduce seat wear providing a high life cycle. Standard Applications Mixing or blending of line medias Diversion of flow to different locations Bypass of flow around strainers, meters, heat exchangers, etc. Direct flow out of or into storage tanks Shutoff flow from different locations.
Next, disconnect high voltage cable from electrode. Then reconnect DC power to the terminal block. If sparking starts, cable is good, DO NOT REPLACE, check the electrode. If no sparking, disconnect DC power at the terminal block and then disconnect high voltage cable at the igniter. Reconnect DC power to the terminal block. If sparking sound from igniter, replace the high HIGH VOLTAGE voltage cable. Next, disconnect DC power at the terminal block. Remove high voltage cable from igniter. Reconnect DC power, the igniter should produce a sparking sound. If not, replace the igniter. ON MODEL RM2510, 2604, 2610 AND 2804, 2810: Next, with the igniter producing spark, set the meter on 20 volts DC or lower scale, connect meter leads to L and ground terminals on the igniter. The meter should read a pulsating voltage. If all of the previous checks are correct, the igniter is good, DO NOT REPLACE. The pulsating voltage allows a lamp to illuminate on the front of the refrigerator to advise the customer spark has been produced. To check the lamp, first, verify it is wired correctly. Next, verify the lamp receptacle is receiving the signal, if so, and lamp is not illuminating (flashing), replace the lamp. NOTE: Do not supply DC power to the lamp. It will NOT illuminate with normal DC power. For the lamp to illuminate it must receive an increased DC signal. DC COMPONENTS SWITCH This is the switch that selects the mode of operation (120 volt AC, gas and 12 volt DC). It is also a circuit interrupter for each mode of operation on the refrigerator. When the customer selects either AC, gas or DC (3- way models only) operation, the selector switch directs electricity first to the interior light and the thermostat and on to the heating element or the igniter for gas mode. When this switch is turned off, the AC or DC circuit is interrupted. To check the switch in the AC mode, continuity should exist between these terminals: 1 to 1A, 2 to 2A and 7 to 7A.